SOAKING AGENT
WCT JSY 浸水助剂
SOAKING AUXILIARY AGENT
Product introduction
WCT JSF Soaking auxiliary agent is a safe and easy to use multi-functional soaking agent, composed of surfactant, alkali bone material and bactericide.WCT JSF soaking agent is a perfect mixture of various materials of the same type required for good soaking effect. After the material is used in the mainsoaking, it is usually unnecessary to use its existing materials, such as alkaline materials and active agents.
Technical indicators and characteristics
Shape: powder (20 ℃)
Appearance: grey or white (20 ℃)
PH: 11.0 -13.0 (10%)
[product advantages]
The best PH stability of the WCT JSF soaking agent is the ability to gently and slowly raise the PH of the solution to the optimal PH level and keep it until the end of the soaking without further adjustment.
Using only this material, WCT JSF soaking agent can quickly soak fresh skin, wet salt skin and dry salt skin and obtain good soak effect through conventional overnight soaking. It is an ideal soaking agent.
WCT JSF wetting agent can be used to ensure that he can not be integrated into the body with a full belly, firm surface and stretched leather, thus ensuring the best fit rate.
The WCT JSF soaking auxiliary agent has a significant surface degreasing effect and maintains the stability of the fat emulsion, thereby preventing fat contamination on the skin and drum surfaces.Intradermal fat is well dispersed and the material is evenly permeated during subsequent operations to prevent the formation of gray spots.
WCT JSF soaking agent can effectively remove feces and dirt from the skin surface and form a stable suspension, ensuring a continuous and stable soak effect.
WCT JSFsoaking auxiliary agent has good bactericidal effect, does not contain ethoxynonylphenol, and has no harm to human body and environment.
【 application 】
GCT JSF soaking auxiliary agent can be added directly or diluted with water 1:5 and then added to the main soak once.The product can be used alone or in combination with the enzyme for the production of salted skin.
To ensure that the best soak is achieved with the WCT JSF soaking auxiliary agent, keep the PH key to about 10.Dosage depends on the state of the original skin, usually 0.3-1 dosage is fully enough.
When soak in water with WCT JSF soaking auxiliary agent, the whole immersion time should not be less than 4 hours.(the PH of the injection solution should be stable after 1 hour, and all percentages are based on the wet salt tare).
The bactericidal effect of WCT JSF soaking auxiliary agent is guaranteed for up to 24 hours under normal conditions.
Storage life
It can be kept for three years in dry and cool places